WLG4C-3P2232A71

4,913,000

Tên sản phẩm: Miniature photoelectric sensors W4-3 Glass

Danh mục: Photoelectric sensors

Model: WLG4C-3P2232A71

ID: 1080935

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1080935 Danh mục:

Mô tả sản phẩm

Photoelectric sensors

Features
Sensor/ detection principle Photoelectric retro-reflective sensor
Dimensions (W x H x D) 16 mm x 39.5 mm x 12 mm
Housing design (light emission) Rectangular
Sensing range max. 0.01 m … 4.5 m 1)
Sensing range 0.02 m … 3.5 m 1)
Type of light Visible red light
Light source PinPoint LED 2)
Light spot size (distance) ? 75 mm (1.5 m)
Wave length 650 nm
Adjustment

Single teach-in button

IO-Link

Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output
Diagnosis Device contamination monitoring, Quality of teach-in
AutoAdapt ?
Special applications Detecting transparent objects
    1) Reflector PL80A.2) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1)
Ripple < 5 Vpp 2)
Power consumption 20 mA 3)
Switching output PNP
Switching mode Light/dark switching
Output current Imax. ? 100 mA
Response time < 0.5 ms 4)
Response time Q/ on Pin 2 300 ?s … 450 ?s 4) 5)
Switching frequency 1,000 Hz 6)
Switching frequency Q / to pin 2 1,000 Hz 7)
Angle of reception Approx. 30?
Attenuation along light beam > 8 %
Connection type Male connector M8, 4-pin
Circuit protection

A 8)

C 9)

D 10)

Protection class III
Weight 30 g
Polarisation filter ?
Housing material Plastic, ABS
Optics material Plastic, PMMA
Enclosure rating

IP67

IP66

Special feature Detecting transparent objects
Ambient operating temperature ?40 ?C … +60 ?C
Ambient storage temperature ?40 ?C … +75 ?C
UL File No. NRKH.E181493 & NRKH7.E181493
Repeatability Q/ on Pin 2: 150 ?s 5)
    1) Limit values.2) May not exceed or fall below Uv tolerances.3) Without load.4) Signal transit time with resistive load.5) Valid for Q on Pin2, if configured with software.6) With light/dark ratio 1:1.7) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.8) A = VS connections reverse-polarity protected.9) C = interference suppression.10) D = outputs overcurrent and short-circuit protected.
Classifications
ECl@ss 5.0 27270902
ECl@ss 5.1.4 27270902
ECl@ss 6.0 27270902
ECl@ss 6.2 27270902
ECl@ss 7.0 27270902
ECl@ss 8.0 27270902
ECl@ss 8.1 27270902
ECl@ss 9.0 27270902
ETIM 5.0 EC002717
ETIM 6.0 EC002717
UNSPSC 16.0901 39121528
Smart Task
Smart Task name Counter + debouncing
Logic function

Direct

WINDOW

Hysteresis

Timer function

Deactivated

On delay

Off delay

ON and OFF delay

Impulse (one shot)

Inverter Yes
Maximum counting frequency

SIO Direct: —

SIO Logic: 1000 Hz

IOL: 900 Hz

Counter reset

SIO Direct: — 1) 1)

SIO Logic: 1,5 ms 2) 2)

IOL: 1,5 ms 3) 3)

Min. Time between two process events (switches)

SIO Direct: — 1)

SIO Logic: 450 ?s 2)

IOL: 500 ?s 3)

Debounce time max.

SIO Direct: — 1)

SIO Logic: 30.000 ms 2)

IOL: 30.000 ms 4)

Switching signal QL1 Output type (dependant on the adjusted threshold)
Switching signal QL2 Output type (dependant on the adjusted threshold)
Measuring value Counting value
    1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.4) Output type (dependant on the adjusted threshold).
Communication interface
Communication interface IO-Link V1.1
Communication Interface detail COM2 (38,4 kBaud)
Cycle time 2.3 ms
Process data length 16 Bit
Process data structure

Bit 0 = switching signal QL1

Bit 1 = switching signal QL2

Bit 2 … 15 = measuring value