Mô tả sản phẩm
Encoders
Performance
| Measurement range | 0 m … 3 m |
| Reproducibility | ? 0.3 mm 1) 2) |
| Linearity | ? ? 2 mm 1) 3) |
| Hysteresis | ? 1.2 mm 1) 4) |
| Resolution (wire draw + encoder) | 0.014 mm 5) 6) |
- 1) Value applies to wire draw mechanism.2) Reproducibility, repetition accuracy, or even repeatability is defined as the maximum scatter from consecutive positioning operations from a single direction to a point, carried out under identical conditions.3) The accuracy of wire draw encoders is primarily described by the linearity. This indicates the maximum deviation for the measurement of a defined measuring path. In contrast to repeatability, this relates to the measuring range covered and not to a positioning point.4) The hysteresis is defined as the maximum scatter from consecutive positioning operations from different directions to a point, carried out under identical conditions.5) The values shown have been rounded.6) Example calculation based on the PFG08 with HTL Push Pull: 230 mm (wire draw length per revolution – see Mechanical data): 16,384 (pulses per revolution) = 0.014 mm (resolution of wire draw + encoder combination).
Interfaces
| Encoder | Incremental encoders |
| Electrical interface | Incremental / TTL / RS-422 |
| Connection type | Male connector M23, 12-pin, radial |
Electrical data
| Maximum output frequency | ? 800 kHz |
| Reference signal, position | Electronically, gated with A and B / Sinus and Cosinus |
| Reference signal, number | 1, electronically, gated with A and B / Sinus and Cosinus |
| Maximum load current | ? 30 mA |
| Initialization time | ? 32 ms, 30 ms, with mechanical zero pulse width 1) 1) |
| Supply voltage | 4.5 V … 32 V |
| Power consumption | 0.7 W |
| MTTFd: mean time to dangerous failure | 300 years 2) 3) |
- 1) Valid positional data can be read once this time has elapsed.2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.3) The value applies to the mounted encoder.
Mechanical data
| Weight (including encoder) | 550 g |
| Weight (mechanics) | 250 g |
| Measuring wire material | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Weight (measuring wire) | 1.2 g/m |
| Housing material, wire draw mechanism | Plastic, Noryl |
| Length of wire pulled out per revolution | 230 mm |
| Spring return force | Approx. 3.3 N … approx. 4.4 N 1) |
| Life of wire draw mechanism | Typ. 1 million cycles 2) 3) |
| Actual wire draw length | 3.2 m |
| Measuring wire diameter | 0.55 mm |
| Wire acceleration | 10 m/s? |
| Operating speed | 4 m/s |
| Mounted encoder | DFS60 |
| Pulses per revolution | 16,384 |
| Part number encoder | 1037565 |
| Mounted mechanic | MRA-G080-103D3 |
| Part number mechanic | 5322778 |
- 1) These values were measred at an ambient temperature of 25 ?C. There may be variations at other temperatures.2) A cycle consists of the wire being pulled out and drawn in.3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating encoder | IP67 |
| Enclosure rating mechanic | IP50 |
| Resistance to shocks | 60 g, 6 ms (according to EN 60068-2-27) |
| Frequency range of resistance to vibrations | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Working temperature range (encoder) | ?30 ?C … +70 ?C |
| Working temperature range (mechanics) | ?30 ?C … +70 ?C |
| Working temperature range (combination) | Defined by the higher minimum and lower maximum value of the operating temperature of the encoder and the mechanism |
| Relative humidity/condensation | 90 % (condensation of the optical scanning not permitted) |
Classifications
| ECl@ss 5.0 | 27270590 |
| ECl@ss 5.1.4 | 27270590 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270590 |
| ECl@ss 8.0 | 27270590 |
| ECl@ss 8.1 | 27270590 |
| ECl@ss 9.0 | 27270590 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
