Mô tả sản phẩm
Fluid sensors
Medium | Liquid, gaseous |
Pressure type | Absolute pressure |
Measuring range | 0 bar … 1 bar |
Process temperature | ?30 ?C … +100 ?C |
Output signal | 4 mA … 20 mA, 2-wire |
Specialty | Without design specifics |
Non-linearity | ? ? 0.5 %, (Best Fit Straight Line, BFSL) according to IEC 61298-2 |
Accuracy | ? ? 1 % of the span |
Adjustment accuracy of zero signal | ? 0.5 % of span typ., ? 0.8 % of span max. (with non-linerarity 0.5 %) |
Hysteresis | ? 0.16 % of the span |
Non-repeatability | ? 0.1 % of the span |
Response time | < 4 ms |
Signal noise | ? 0.3 % of the span |
Long-term drift/one-year stability | ? 0.1 % of span to IEC 61298-2 |
Rated temperature range | 0 ?C … +80 ?C |
Service life | Minimum 100 Mio. life cycles |
Process connection | G ? A according to DIN 3852-E |
Wetted parts |
Pressure Connection: stainless steel 316L Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar … 10 bar rel stainless steel 13-8 PH) |
Internal transmission fluid | Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ? 0 bar abs ... 25 bar abs) |
Pressure port | Standard |
Housing material | Stainless steel 316L |
Connection type | Round connector M12 x 1, 4-pin, IP67 |
Supply voltage |
8 V DC … 30 V DC with output signal 4 mA … 20 mA and 0 V … 5 V 14 V DC … 30 V DC with output signal 0 V … 10 V 8 V DC … 30 V DC 1) |
Power consumption |
Signal current (max. 25 mA) for current output Max. 8 mA for voltage output signal |
Electrical safety |
Overvoltage protection: 32 V DC, 36 V DC with 4 mA … 20 mA Short-circuit protection: QA towards M Reverse polarity protection: L+ to M Protection class: III |
Isolation voltage | 500 V DC |
CE-conformity | Pressure equipment directive: 2014/68/EU, EMC directive: 2014/30/EU, EN 61 326-2-3 |
Weight sensor | Approx. 80 g |
Seal | NBR |
Enclosure rating | IP67 |
Protection class III | ? |
Reference conditions | Reference conditions: According to IEC 61298-1 |
MTTF | 815 years |
- 1) The pressure transmitter must be supplied with power by a limited energy circuit compliant with 9.3 of UL/EN/IEC 601010-1 or LPS to UL/EN/IEC 60950-1 or Class 2 to UL 1310/UL1585 (NEC or CEC). The power supply must be suitable for operation above 2,000 m if the pressure transmitter is used above this altitude.
Ambient temperature | 0 ?C … +80 ?C |
Storage temperature | ?30 ?C … +100 ?C |
Relative humidity | 45 % … 75 % |
Shock load | 500 g according to IEC 60068-2-27 (mechanical shock) |
Vibration load |
10 g according to IEC 60068-2-6 (vibration under resonance) 20 g optional |
ECl@ss 5.0 | 27200614 |
ECl@ss 5.1.4 | 27200614 |
ECl@ss 6.0 | 27200614 |
ECl@ss 6.2 | 27200614 |
ECl@ss 7.0 | 27200614 |
ECl@ss 8.0 | 27200614 |
ECl@ss 8.1 | 27200614 |
ECl@ss 9.0 | 27200614 |
ETIM 5.0 | EC002476 |
ETIM 6.0 | EC002476 |
UNSPSC 16.0901 | 41112410 |