M40E-072200RT0

41,120,000

Tên sản phẩm: Multiple light beam safety devices M4000 Standard / Receiver

Danh mục: Opto-electronic protective devices

Model: M40E-072200RT0

ID: 1206083

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1206083 Danh mục:

Mô tả sản phẩm

Opto-electronic protective devices

Features
Scanning range 0.5 m … 70 m, configurable
Low scanning range 0.5 m … 20 m
Great scanning range 9 m … 70 m
Number of beams 7
Beam separation 220 mm
Response time 10 ms
Synchronization Optical synchronisation
Safety-related parameters
Type Type 4 (IEC 61496-1)
Safety integrity level

SIL3 (IEC 61508)

SILCL3 (EN 62061)

Category Category 4 (EN ISO 13849)
Performance level PL e (EN ISO 13849)
PFHD (mean probability of a dangerous failure per hour) 6.6 x 10-9 (EN ISO 13849)
TM (mission time) 20 years (EN ISO 13849)
Safe state in the event of a fault At least one OSSD is in the OFF state.
Functions
Functions Delivery status
Restart interlock ? Internal
External device monitoring (EDM) ? Activated
Beam coding ? Uncoded
Configurable scanning range ? 0.5 m … 20 m
Configurable application diagnostic output ? Contamination (OWS)
Interfaces
System connection
Connection type Male connector M12, 8-pin
Permitted cable length ? 15 m 1)
Permitted cross-section ? 0.25 mm?
Configuration method Configuration buttons
Display elements

LEDs

7-segment display

Fieldbus, industrial network
Integration via Flexi Soft safety controller CANopen, DeviceNet?, EtherCAT?, EtherNet/IP?, Modbus TCP, PROFIBUS DP, PROFINET 2)
    1) Depending on load, power supply and wire cross-section. The technical specifications must be observed.2) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Protection class III (IEC 61140)
Supply voltage VS 24 V DC (19.2 V DC … 28.8 V DC) 1)
Residual ripple ? 10 % 2)
Power consumption ? 0.6 A 3)
Output signal switching devices (OSSDs)
Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 4)
ON state, switching voltage HIGH 24 V DC (VS ? 2.25 V DC … VS)
OFF state, switching voltage LOW ? 2 V DC
Current-carrying capacity per OSSD ? 500 mA
Diagnostic outputs
Type of output PNP semiconductor, short-circuit protected
ON state, switching voltage HIGH 24 V DC (VS ? 4.2 V DC … VS)
OFF state, switching voltage LOW High resistance
Current-carrying capacity per OSSD ? 100 mA
    1) The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as accessories from SICK.2) Within the limits of VS.3) Without load.4) Applies to the voltage range between ?30 V and +30 V.
Mechanical data
Housing cross-section 52 mm x 55.5 mm
Housing material Aluminum alloy ALMGSI 0.5
Surface treatment Powder coated
Front screen material Polycarbonate, scratch-resistant coating
Ambient data
Enclosure rating IP65 (EN 60529)
Ambient operating temperature ?30 ?C … +55 ?C
Storage temperature ?30 ?C … +70 ?C
Air humidity 15 % … 95 %, Non-condensing
Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6)
Shock resistance 10 g, 16 ms (IEC 60068-2-29)
Classifications
ECl@ss 5.0 27272703
ECl@ss 5.1.4 27272703
ECl@ss 6.0 27272703
ECl@ss 6.2 27272703
ECl@ss 7.0 27272703
ECl@ss 8.0 27272703
ECl@ss 8.1 27272703
ECl@ss 9.0 27272703
ETIM 5.0 EC001832
ETIM 6.0 EC001832
UNSPSC 16.0901 46171620