Mô tả sản phẩm
Motor feedback systems
Performance
| Resolution per revolution | 15 bit | ||||||
| Number of the absolute ascertainable revolutions | 1 | ||||||
| Signal noise (?) | ? 20 ? 1) | ||||||
|
|||||||
| Speed when switching on/resetting the motor feedback system | ? 6,000 min?? | ||||||
| Available memory area | 8,192 Byte | ||||||
- 1) Nominal position, 25 ?C, filter setting 21 kHz.2) See diagram for error limits (default filter setting: 21 kHz).
Interfaces
| Code sequence | Increasing, when turning the shaft For clockwise rotation, looking in direction ?A? (see dimensional drawing) |
| Communication interface | HIPERFACE DSL? |
| Initialization time | Max. 500 ms 1) |
| Measurement external temperature resistance |
32-bit value, without prefix (1 ?) 0 … 209.600 ? 2) |
- 1) From reaching a permitted operating voltage.2) Without sensor tolerance, at ?17 ?C … +167 ?C: NTC +-2K (103 GT), PTC+-3K (KTY84/130/PT1000).
Electrical data
| Connection type | Male connector, 4-pin |
| Supply voltage range | 7 V … 12 V |
| Warm-up time voltage ramp | Max. 180 ms 1) |
| Output current | ? 150 mA 2) |
- 1) Duration of the voltage ramp between 0 and 7.0 V, see diagram ?Current consumption? in the diagram section.2) Current rating applies when using interface circuit suggestions as shown in HIPERFACE DSL ? manual (8017595).
Mechanical data
| Shaft version | Tapered shaft |
| Dimensions | See dimensional drawing |
| Weight | ? 0.1 kg |
| Moment of inertia of the rotor | 1 gcm? |
| Operating speed | ? 12,000 min?? |
| Angular acceleration | ? 500,000 rad/s? |
| Permissible radial shaft movement | ? 0.15 mm |
| Permissible axial shaft movement | ? 0.5 mm |
Ambient data
| Operating temperature range | ?40 ?C … +115 ?C 1) |
| Storage temperature range | ?40 ?C … +120 ?C, without package |
| Relative humidity/condensation | 85 %, Condensation not permitted |
| Resistance to shocks | 100 g, 6 ms (according to EN 60068-2-27) |
| Frequency range of resistance to vibrations | 50 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| EMC | According to EN 61000-6-2: 2016, EN 61000-6-4: 2006, IEC 6100-6-7: 2014 2) |
| Enclosure rating | IP30, When cover is closed and mating connector is attached (acc. to EN 60529-1) 3) |
- 1) For typical values for self-heating, see diagram ?Electrical self-heating? in the diagram section. see section ?Mounting? in the operating instructions (8021414/8021265).2) EMC according to the listed standards is guaranteed if the motor feedback system with mating plug inserted is connected to the central grounding point of the motor controller via a cable shield. If other screening concepts are used, users must perform their own tests. Class A device.3) When using the strands (2079920).
Classifications
| ECl@ss 5.0 | 27270590 |
| ECl@ss 5.1.4 | 27270590 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270590 |
| ECl@ss 8.0 | 27270590 |
| ECl@ss 8.1 | 27270590 |
| ECl@ss 9.0 | 27270590 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
