Tên sản phẩm: Measuring wheel encoders DFV60

Danh mục: Encoders

Model: DFV60A-22PC65536

ID: 1051309

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1051309 Danh mục:

Mô tả sản phẩm


? 0,4 mm/m, subject to the measuring wheel (wheel + surface)
? 0,4 mm/m, subject to the measuring wheel (wheel + surface)
Initialization time 30 ms
Electrical data
Electrical interface 4.5 V … 32 V, TTL/HTL programmable
Connection type Male connector M12, 8-pin, radial
Load current ? 30 mA
Maximum output frequency ? 820 kHz
Reference signal, number 1
Reference signal, position 90?, electric, logically gated with A and B
MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Measuring wheel circumference 300 mm
Measuring wheel surface O-ring NBR70 1)
Mass 500 g
Encoder material
Shaft Stainless steel
Flange Aluminum
Housing Aluminum
Cable PUR
Spring arm mechanism material
Spring element Not contained in the scope of delivery of the system
Measuring wheel, spring arm Aluminum
Start up torque 0.8 Ncm (at 20 ?C)
Operating torque 0.6 Ncm (at 20 ?C)
Operating speed 1,500 min??
Maximum operating speed 3,000 min?? 2)
Bearing lifetime 3 x 10^9 revolutions
Maximum travel/deflection of spring arm 40 mm
Max. permissible working area for the spring (continuous operation) ? 10 mm
Recommended spring deflection 20 mm … 40 mm
Mounting position relative to the measuring object Preferably from above, from below possible
    1) The surface of a measuring wheel is subject to wear. This depends on contact pressure, acceleration behavior in the application, traversing speed, measurement surface, mechanical alignment of the measuring wheel, temperature, and ambient conditions. We recommend you regularly check the condition of the measuring wheel and replace as required.2) Self-warming 3.3 K per 1,000 rpm, when applying, note operating temperature range.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-4
Enclosure rating IP65
Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Working temperature range ?20 ?C … +100 ?C
Storage temperature range ?40 ?C … +100 ?C, without package
ECl@ss 5.0 27270501
ECl@ss 5.1.4 27270501
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270501
ECl@ss 8.0 27270501
ECl@ss 8.1 27270501
ECl@ss 9.0 27270501
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113