Mô tả sản phẩm
Encoders
Performance
| Measurement range | 0 m … 3 m |
| Reproducibility | ? 0.2 mm 1) |
| Linearity | ? ? 2 mm 1) |
| Hysteresis | ? 0.4 mm 1) |
| Resolution (wire draw + encoder) | 0.06 mm 2) 3) |
- 1) Value applies to wire draw mechanism.2) The values shown have been rounded.3) Example calculation based on the BCG08 with PROFINET: 230 mm (wire draw length per revolution – see Mechanical data): 262,144 (number of steps per revolution) = 0.001 mm (resolution of wire draw + encoder combination).
Interfaces
| Encoder | Absolute encoders |
| Electrical interface | Analog / Voltage |
| Connection type | Cable, 3-wire, radial, 1.5 m |
| Clock frequency | 32 kHz |
| Set (electronic adjustment) | Over membrane keyboard |
Electrical data
| Initialization time | ? 2 ms 1) |
| Supply voltage | 19 V … 33 V |
| Power consumption | 2 W |
- 1) Valid positional data can be read once this time has elapsed.
Mechanical data
| Weight (including encoder) | 650 g |
| Weight (mechanics) | 250 g |
| Measuring wire material | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Weight (measuring wire) | 1.2 g/m |
| Housing material, wire draw mechanism | Plastic, Noryl |
| Length of wire pulled out per revolution | 230 mm |
| Spring return force | Approx. 5 N … approx. 6.3 N 1) |
| Life of wire draw mechanism | Typ. 1 million cycles 2) 3) |
| Actual wire draw length | 3.2 m |
| Measuring wire diameter | 0.55 mm |
| Wire acceleration | 10 m/s? |
| Operating speed | 4 m/s |
| Mounted encoder | ACM36 |
| Part number encoder | 6039752 |
| Mounted mechanic | MRA-G080-103D3 |
| Part number mechanic | 5322778 |
- 1) These values were measred at an ambient temperature of 25 ?C. There may be variations at other temperatures.2) A cycle consists of the wire being pulled out and drawn in.3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.
Ambient data
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating encoder | IP65 |
| Enclosure rating mechanic | IP50 |
| Resistance to shocks | 50 g, 6 ms (according to EN 60068-2-27) |
| Frequency range of resistance to vibrations | 4 g, Sinus 5 Hz … 100 Hz (according to EN 60068-2-6) |
| Working temperature range (encoder) | ?30 ?C … +70 ?C |
| Working temperature range (mechanics) | ?30 ?C … +70 ?C |
| Working temperature range (combination) | Defined by the higher minimum and lower maximum value of the operating temperature of the encoder and the mechanism |
Classifications
| ECl@ss 5.0 | 27270590 |
| ECl@ss 5.1.4 | 27270590 |
| ECl@ss 6.0 | 27270590 |
| ECl@ss 6.2 | 27270590 |
| ECl@ss 7.0 | 27270590 |
| ECl@ss 8.0 | 27270590 |
| ECl@ss 8.1 | 27270590 |
| ECl@ss 9.0 | 27270590 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
