Mô tả sản phẩm

Application Medium temperature [?C] -10…50 Electrical data Operating voltage [V] 26.5…31.6 DC Max. current consumption from AS-i [mA] 180 Inputs / outputs Number of inputs and outputs Number of digital inputs: 2; Number of pneumatic outputs: 2 Inputs Number of digital inputs 2 Input circuit of digital inputs PNP Sensor supply of the inputs AS-i Voltage supply [V] 20…30; (via flat cable) Max. total current rating of inputs [mA] 100 Input current High [mA] 6…10 Input current Low [mA] 0…2 Min. switching level high signal [V] 11 Digital inputs protected against short circuits yes Outputs Electrical design AS-i Number of pneumatic outputs 2; (pneumatic NO/NC selectable output ; bistable) Operating conditions Ambient temperature [?C] -10…55 Protection IP 65; IP 67 Tests / approvals EMC

EN 50295
IEC 61000-6-2

MTTF [years] 286 AS-i classification AS-i version 2.11 + 3.0 AS-i addressing addressing socket Extended addressing mode possible no AS-i profile S-3.F.F AS-i I/O configuration [hex] 3 AS-i ID code [hex] F.F AS-i certificate pending yes Assignment of the data bits

data bit	D0	D1	D2	D3
input	1	2	3	4
socket	I-1/2	I-1/2 I-2	–	–
pin	4	2 4	–	–
pneumatic output	–	–	4	2

Mechanical data Weight [g] 383.5 Type of mounting AS-i flat cables directly connectable Materials PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated Pneumatic system 1 x 5/2-way slide valves (free from overlapping); bistable Operating pressure range [bar] 3…8 Operating pressure range [MPa] 0.3…0.8 Operating pressure range [psi] 43.5…116 Air flow at 6/5 bar [l/min] 500 Permissible compressed air non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 Manual override pressing/releasing or pressing/turning/locking Tube fittings 8 mm Exhaust exhaust can be discharged through tube connection Displays / operating elements Display

operation	LED, green
errors	LED, red
function	LED, yellow

Accessories Accessories (supplied)

lower part

Accessories (optional)

Mounting plate, E74999

Module lower part, E75000

Protective cap: M12, E73004

sealing plugs, E75231

silencer, E75232

Push-in L-fitting, E75228

Push-in T-fitting, E75227

Remarks Remarks

If not pneumatically operated, E75231 sealing plug must be inserted.

Avoid ingress of dirt and dust.

Do not connect any of the following points to an external potential:

I-, I+, I1, I2

The connections are electrically connected with the AS-i cable.

Notes on compressed air and EMC/ESD at www.ifm.com

Pack quantity 1 pcs. Electrical connection Connection quick mounting technology for AS-i flat cable: ; three orientations possible Connection Connector: M12 Diagrams and graphs Pneumatic symbol

	1 x 5/2-way slide valves (free from overlapping); bistable