AFM60A-S4AL262144

17,508,000

Tên sản phẩm: Absolute encoders AFS/AFM60 SSI

Danh mục: Product portfolio

Model: AFM60A-S4AL262144

ID: 1037671

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1037671 Danh mục:

Mô tả sản phẩm

Product portfolio

Performance
Number of steps per revolution 262,144 1) 2)
Number of revolutions 4,096
Resolution 18 bit x 12 bit
Error limits G 0.03? 3)
Repeatability standard deviation ?r 0.002? 4)
    1) See maximum revolution range.2) Maximum number of increments per revolution, encoders with a smaller number of increments per revolution are also available.3) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.4) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface SSI
Initialization time 50 ms 1)
Position forming time < 1 ?s
SSI
Code type Gray
Code sequence parameter adjustable CW/CCW parameter adjustable
Clock frequency ? 2 MHz 2)
Set (electronic adjustment) H-active (L = 0 – 3 V, H = 4,0 – Us V)
CW/CCW (counting sequence when turning) L-active (L = 0 – 1,5 V, H = 2,0 – Us V)
    1) Valid positional data can be read once this time has elapsed.2) Minimum, LOW level (Clock +): 500 ns.
Electrical data
Connection type Cable, 8-wire, universal, 3 m 1)
Supply voltage range 4.5 V DC … 32 V DC
Power consumption ? 0.7 W (without load)
Reverse polarity protection ?
MTTFd: mean time to dangerous failure 250 years (EN ISO 13849-1) 2)
    1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Solid shaft, face mount flange
Shaft diameter 10 mm x 19 mm
Shaft length 19 mm
Weight 0.3 kg 1)
Shaft material Stainless steel
Flange material Aluminum
Housing material Aluminum die cast
Start up torque < 0.5 Ncm 2)
Operating torque < 0.3 Ncm 2)
Permissible movement static

? 0.5 mm (axial)

? 0.3 mm (radial)

Permissible movement dynamic

? 0.1 mm (axial)

? 0.05 mm (radial)

Permissible Load capacity of shaft

80 N / radial

40 N / axial

Moment of inertia of the rotor 6.2 gcm?
Bearing lifetime 3.0 x 10^9 revolutions
Angular acceleration + 500,000 rad/s?
Operating speed ? 9,000 min?? 3)
    1) Relates to devices with male connector connection.2) At 20 ?C.3) Allow for self-heating of approx. 3.3 K/1,000 rpm when designing the operating temperature range.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating

IP65, shaft side (according to IEC 60529)

IP67, housing side (according to IEC 60529) 2)

Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range ?40 ?C … +100 ?C 3)
Storage temperature range ?40 ?C … +100 ?C, without package
Resistance to shocks 60 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) EMC according to the standards quoted is achieved if shielded cables are used.2) For devices with connector outlet: With mating connector mounted.3) Stationary position of the cable.
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113