AFM60A-BDIB018X12

23,051,000

Tên sản phẩm: Absolute encoders AFS/AFM60 EtherNet/IP

Danh mục: Encoders

Model: AFM60A-BDIB018X12

ID: 1055325

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1055325 Danh mục:

Mô tả sản phẩm

Encoders

Performance
Number of steps per revolution 262,144 (max.)
Number of revolutions 4,096 (max.)
Resolution 18 bit x 12 bit
Error limits G 0.03? 1)
Repeatability standard deviation ?r 0.002? 2)
    1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.2) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface EtherNet/IP?
Encoder profile 0 x 22
Data transmission rate (baud rate)

10 Mbit/s

100 Mbit/s

Transmission medium CAT-5e cable
Parameterising data Number of steps per revolution, number of revolutions, PRESET, counting direction, sampling rate for speed monitoring, unit for outputting the speed, acceleration, and temperature, output of scaleable limit values such as: position ranges, speed, acceleration, number of movements cw/ccw, direction chances, operating hours for power-on/motion, round axis functionality (only multiturn version), heartbeat
RPI (requested packet interval) 5 ms … 750 ms
DLR (Device Level Ring) ?
Available diagnostics data Current, minimum and maximum temperature, maximum speed, power-on counter, operating hours counter for power-on/motion, counter of direction changes/number of movements cw/number of movements ccw, minimum and maximum operating voltage, signal monitoring for single and multiturn
Initialization time Approx. 12 s
Electrical data
Connection type Male connector, 3 x M12, 4-pin, axial
Supply voltage range 10 V DC … 30 V DC
Reverse polarity protection ?
MTTFd: mean time to dangerous failure 80 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Blind hollow shaft
Shaft diameter 10 mm
Weight 0.2 kg
Shaft material Stainless steel
Flange material Aluminum
Housing material Aluminum
Start up torque 0.8 Ncm
Operating torque 0.6 Ncm
Permissible shaft movement, axial static/dynamic ? 0.5 mm, ? 0.1 mm
Permissible shaft movement, radial static/dynamic ? 0.3 mm, ? 0.05 mm
Moment of inertia of the rotor 40 gcm?
Bearing lifetime 3.0 x 10^9 revolutions
Angular acceleration ? 500,000 rad/s?
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating

IP65, shaft side (according to IEC 60529)

IP67, housing side (according to IEC 60529) 2)

Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range ?40 ?C … +85 ?C
Storage temperature range ?40 ?C … +100 ?C, without package
Resistance to shocks 100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) EMC according to the standards quoted is achieved if shielded cables are used.2) With mating connector fitted.
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113