Mô tả sản phẩm
Product characteristics |
Electrical design |
PNP/NPN; (parameterisable) |
Output function |
normally open / normally closed; (parameterisable) |
Communication interface |
IO-Link |
Housing |
threaded type |
Dimensions [mm] |
M12 x 1 / L = 60 |
Application |
Application |
Use in wet areas and in the food and beverage industry |
Pressure rating [bar] |
100 |
Note on pressure rating |
|
Electrical data |
Operating voltage [V] |
10…30 DC |
Current consumption [mA] |
< 15 |
Protection class |
III |
Reverse polarity protection |
yes |
Outputs |
Electrical design |
PNP/NPN; (parameterisable) |
Output function |
normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V] |
2.5 |
Permanent current rating of switching output DC [mA] |
100 |
Switching frequency DC [Hz] |
100 |
Short-circuit protection |
yes |
Overload protection |
yes |
Detection zone |
Switch point IO-Link [mm] |
0.7…3.51; (parameterisable) |
Measuring range IO-Link [mm] |
0.375…3.75 |
Accuracy / deviations |
Correction factor |
steel: 1 / stainless steel: 0.7 / brass: 0.8 / aluminium: 0.6 / copper: 0.3 |
Hysteresis [% of Sr] |
3…15 |
Linearity error IO-Link [%] |
? 2; (of the final value of the measuring range) |
Repeatability IO-Link [%] |
? 1; (of the final value of the measuring range) |
Temperature coefficient |
? 0,2 %/K; (of the final value of the measuring range) |
Interfaces |
Communication interface |
IO-Link |
Transmission type |
COM2 (38,4 kBaud) |
IO-Link revision |
1.1 |
SDCI standard |
IEC 61131-9 |
IO-Link device ID |
1090 d / 00 04 42 h |
Profiles |
Smart Sensor: Identification and diagnosis; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Teach Channel |
SIO mode |
yes |
Required master port type |
A |
Min. process cycle time [ms] |
3.2 |
Operating conditions |
Ambient temperature [?C] |
0…100 |
Protection |
IP 65; IP 66; IP 67; IP 68; IP 69K |
Tests / approvals |
EMC |
EN 61000-4-2 ESD |
4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated |
10 V/m |
EN 61000-4-4 Burst |
2 kV |
EN 61000-4-6 HF conducted |
10 V |
EN 55011 |
class B |
|
Impact resistance |
|
Vibration resistance |
EN 60068-2-6 Fc |
20 g (10…3000 Hz) / 50 sweep cycles per frequency; 1 octave per minute in 3 axes |
|
Shock resistance |
EN 60068-2-27 Ea |
100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
|
Continuous shock resistance |
EN 60068-2-27 |
40 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
|
Fast temperature change |
EN 60068-2-14 Nc |
TA = 0?C; TB = 100?C; t1 = 30 min; t2 = < 10 s 50 cycles |
|
Salt spray test |
EN 60068-2-52 Kb |
severity level 5 (4 test cycles) |
|
MTTF [years] |
635 |
UL approval |
Ta |
-25…70 ?C |
Enclosure type |
Type 1 |
voltage supply |
Limited Voltage/Current |
UL Approval no. |
A008 |
File number UL |
E174191 |
|
Mechanical data |
Weight [g] |
29.2 |
Housing |
threaded type |
Mounting |
flush mountable |
Dimensions [mm] |
M12 x 1 / L = 60 |
Thread designation |
M12 x 1 |
Materials |
stainless steel (1.4404 / 316L); sensing face: stainless steel (1.4404 / 316L); LED window: PEI; lock nuts: stainless steel (1.4404 / 316L) |
Tightening torque [Nm] |
15 |
Length [mm] |
60 |
Displays / operating elements |
Display |
switching status |
4 x LED, yellow |
|
Accessories |
Accessories (supplied) |
|
Remarks |
Pack quantity |
1 pcs. |
Electrical connection |
Connection |
Connector: 1 x M12 |