SRS50S-HEA0-K21

10,840,000

Tên sản phẩm: Motor feedback systems rotary HIPERFACE? SRS/SRM50

Danh mục: Motor feedback systems

Model: SRS50S-HEA0-K21

ID: 1051805

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1051805 Danh mục:

Mô tả sản phẩm

Motor feedback systems

Safety-related parameters
Safety integrity level SIL2 (IEC 61508), SILCL2 (IEC 62061)
Category 3 (EN ISO 13849)
Maximum demand rate Continuous (analog signals)
Performance level PL d (EN ISO 13849) 1)
PFHD: Probability of dangerous failure per hour 1.0 x 10-8 2)
TM (mission time) 20 years (EN ISO 13849)
MTTFd: mean time to dangerous failure 1,073 years (EN ISO 13849)
    1) For more detailed information on the exact configuration of your machine/unit, please consult your relevant SICK branch office.2) The values displayed apply to a diagnostic degree of coverage of 90%, which must be achieved by the external drive system.
Performance
Sine/cosine periods per revolution 1,024
Number of the absolute ascertainable revolutions 1
Total number of steps 32,768
Measuring step 0.3 ? For interpolation of the sine/cosine signals with, e. g., 12 bits
Integral non-linearity Typ. ? 45 ?, Error limits for evaluating sine/cosine period, without mechanical tension of the stator coupling
Differential non-linearity ? 7 ?, Non-linearity within a sine/cosine period
Operating speed ? 6,000 min??, up to which the absolute position can be reliably produced
Available memory area 128 Byte
Interfaces
Type of code for the absolute value Binary
Code sequence Increasing, when turning the shaft For clockwise rotation, looking in direction ?A? (see dimensional drawing), For clockwise shaft rotation, looking in direction ?A? (see dimensional drawing)
Communication interface HIPERFACE?
Electrical data
Connection type Male connector, 8-pin, radial
Supply voltage range 7 V DC … 12 V DC
Recommended supply voltage 8 V DC
Output current 80 mA 1)
Output frequency for sine/cosine signals ? 200 kHz
    1) Without load.
Mechanical data
Shaft version Tapered shaft
Flange type / stator coupling Rubber support, Rubber support
Dimensions See dimensional drawing
Weight ? 0.2 kg
Moment of inertia of the rotor 10 gcm?
Operating speed ? 12,000 min??
Angular acceleration ? 200,000 rad/s?
Operating torque 0.2 Ncm
Start up torque + 0.4 Ncm
Permissible movement of the drive element, static

? 0.3 mm radial

? 0.75 mm axial

Permissible movement of the drive element, dynamic

? 0.1 mm radial

? 0.2 mm axial

Angular motion perpendicular to the rotational axis, static ? 0.005 mm/mm
Angular motion perpendicular to the rotational axis, dynamic ? 0.0025 mm/mm
Life of ball bearings 3.6 x 10^9 revolutions
Ambient data
Operating temperature range ?30 ?C … +115 ?C
Storage temperature range ?40 ?C … +125 ?C, without package
Relative humidity/condensation 90 %, Condensation not permitted
Resistance to shocks 100 g, 10 ms, 10 ms (according to EN 60068-2-27)
Frequency range of resistance to vibrations 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
EMC According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating IP40, with mating connector inserted (according to IEC 60529)
    1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. The GND-(0 V) connection of the supply voltage is also grounded here. If other shielding concepts are used, users must perform their own tests.
Classifications
ECl@ss 5.0 27270590
ECl@ss 5.1.4 27270590
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270590
ECl@ss 8.0 27270590
ECl@ss 8.1 27270590
ECl@ss 9.0 27270590
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113