Mô tả sản phẩm
Safety systems and solutions
Safety-related parameters of the safety system
| Safety integrity level |
SIL2 (IEC 61508) SILCL2 (EN 62061) |
| Category | Category 3 (EN ISO 13849-1) |
| Performance level | PL d (EN ISO 13849-1) |
| PFHD (mean probability of a dangerous failure per hour) | 1.8 x 10-7 |
| DCavg (diagnostic coverage) | 91 % (EN ISO 13849-1) |
| MTTFD (mean time to dangerous failure) | 63 years (EN ISO 13849-1) |
| CCF (common cause failure) | Fulfilled (EN ISO 13849-1) |
| TM (mission time) | 20 years (EN ISO 13849-1) |
Flexi Soft safety controller
| Note | The Flexi Soft station has a modular design and can be customized based on the operator?s requirements. At least one main module, the right system plug, and at least one I/O module must be used. | ||||||
| Flexi Soft station construction |
Modular 1 main module 1 system plug 0 … 2 gateways 1 … 12 expansion modules |
||||||
| Module interconnection | Internal bus (FLEXBUS+) | ||||||
|
|||||||
| Number of connectable sensor pairs | Approx. 30 (depending on logic/number of logic modules used) | ||||||
| Connection type | Spring terminals | ||||||
| Pulse rate of the sensors | 2 Hz | ||||||
|
|||||||
| Supply voltage VS | 24 V DC (16.8 V … 30 V) | ||||||
| Protection class | III (EN 50178) | ||||||
|
|||||||
| Ambient operating temperature | ?25 ?C … 55 ?C | ||||||
| Fieldbus, industrial network | CANopen, EtherCAT?, EtherNet/IP?, Modbus TCP, PROFIBUS DP, PROFINET, DeviceNet? | ||||||
| Type of fieldbus integration | Via gateway | ||||||
MultiPulse photoelectric proximity sensor
| Number of sensors | 2 pieces |
| Detection zone | 30 mm … 100 mm 1) |
| Remission | 6 % … 90 % |
| Pulse frequency | 2 Hz |
| Response time | ? 500 ms |
| Type of light | Visible red light |
| Wave length | 650 nm |
| Light spot size (distance) | ? 7 mm (50 mm) |
| Connection type | Connector M8, 3-pin |
| Voltage supply | Via Flexi Soft |
| Enclosure rating | IP67 (EN 60529) |
| Ambient operating temperature | ?40 ?C … +60 ?C |
- 1) If no movable physical guard is identified in the detection zone, the safety controller prompts the machine to enter the safe state.
