GL10-03811S01

3,930,000

Tên sản phẩm: Small photoelectric sensors G10

Danh mục: Photoelectric sensors

Model: GL10-03811S01

ID: 1069477

Nhà sản xuất: SICK

Xuất xứ: MY

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1069477 Danh mục:

Mô tả sản phẩm

Photoelectric sensors

Features
Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens
Dimensions (W x H x D) 20 mm x 50 mm x 51.5 mm
Housing design (light emission) Rectangular
Sensing range max.

0.08 m … 15 m 1)

0.08 m … 12 m 2)

Sensing range

0.15 m … 12 m 1)

0.15 m … 10 m 2)

Type of light Visible red light
Light source PinPoint LED 3)
Light spot size (distance) ? 58 mm (5 m)
Wave length 625 nm
Adjustment Potentiometer, 270?
    1) Reflector PL80A.2) Reflector P250.3) Average service life: 100,000 h at TU = +25 ?C.
Mechanics/electronics
Supply voltage 12 V DC … 30 V DC 1)
Ripple ? 5 Vpp 1)
Power consumption 40 mA
Switching output Relay, SPDT, electrically isolated 2)
Switching load max. (current/voltage)

0.11 A (250 V DC)

3 A (30 V DC)

3 A (250 V AC)

Response time ? 10 ms
Switching frequency 20 Hz 3)
Connection type Cable, 5-wire, 2 m 4)
Cable material PVC
Conductor cross-section 0.25 mm?
Circuit protection C 5)
Protection class II 6)
Weight 115 g
Polarisation filter ?
Interference emission EN 61000-6-3 (2011-09) 7)
Special device ?
Housing material Plastic, ABS/PMMA
Enclosure rating IP67
Relay switching cycles min. 100.000 cycles (3 A)
Usage category AC-15, DC-13, according to EN 60947-1
EMC EN 60947-5-2
Ambient operating temperature ?30 ?C … +60 ?C 8)
Ambient storage temperature ?40 ?C … +70 ?C
UL File No. NRKH.E348498 & NRKH7.E348498
More standards UL325 9)
    1) May not exceed or fall below Uv tolerances.2) Provide suitable spark suppression for inductive or capacitive loads.3) With light/dark ratio 1:1.4) Do not bend below 0 ?C.5) C = interference suppression.6) Reference voltage: 250 V AC.7) In the case of a DC supply (ref. to EN 61000-6-3) the length of cable between the supply source and the sensor must be < 30 m.8) UL: 0 ?C … +50 ?C.9) Complies with the UL325 standard when used with sturdy protection hood (e.g. BEF-G10WSG, 2071960).
Classifications
ECl@ss 5.0 27270902
ECl@ss 5.1.4 27270902
ECl@ss 6.0 27270902
ECl@ss 6.2 27270902
ECl@ss 7.0 27270902
ECl@ss 8.0 27270902
ECl@ss 8.1 27270902
ECl@ss 9.0 27270902
ETIM 5.0 EC002717
ETIM 6.0 EC002717
UNSPSC 16.0901 39121528