DUV60E-32KFACCA

9,284,000

Tên sản phẩm: Measuring wheel encoders DUV60

Danh mục: Encoders

Model: DUV60E-32KFACCA

ID: 1088797

Nhà sản xuất: SICK

Xuất xứ: US

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1088797 Danh mục:

Mô tả sản phẩm

Encoders

Performance
Linear resolution 0.125 mm/pulse to 304.8 mm/pulse (type-dependent)
Pulses per revolution 1 … 1800 1)
Measuring step 90? electric/pulses per revolution
Measuring step deviation ? 18?, / pulses per revolution
Error limits Measuring step deviation x 3
Duty cycle ? 0.5 ? 5 %
Initialization time < 5 ms 2)
    1) Available pulses per revolution see type code.2) Valid positional data can be read once this time has elapsed.
Electrical data
Electrical interface 4.75 V … 30 V, TTL/HTL DIP switch, selectable output 1)
Connection type Male connector, universal 2)
DIP switch parameters
Pulses per revolution ?
Output voltage ?
Direction of rotation ?
Power consumption max. without load ? 1.25 W
Load current max. ? 30 mA, per channel
Maximum output frequency 60 kHz
Reference signal, number 1
Reference signal, position 180?, electric, gated with A
Reverse polarity protection ?
Short-circuit protection of the outputs ?
MTTFd: mean time to dangerous failure 275 years (EN ISO 13849-1) 3)
    1) The output is not selectable for DIP switch configurations E, F, and G. The output voltage value is dependent on the supply voltage.2) The universal connection is rotatable so that it is possible to position the conector in the radial or axial direction.3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Measuring wheel circumference 300 mm
Measuring wheel surface O-ring NBR70 1)
Spring arm design Spring arm, encoder on mounting side
Mass 0.45 kg 2)
Encoder material
Shaft Stainless steel
Flange Aluminum
Housing Aluminum
Cable PVC
Spring arm mechanism material
Spring element Spring steel
Measuring wheel, spring arm Aluminum
Start up torque 1.2 Ncm
Operating torque 1.1 Ncm
Operating speed 1,500 min??
Bearing lifetime 3.6 x 10^9 revolutions
Maximum travel/deflection of spring arm 14 mm 3)
Recommended pretension 10 mm 3)
Max. permissible working area for the spring (continuous operation) ? 3 mm
Service life of spring element > 1.4 million cycles 3)
    1) The surface of a measuring wheel is subject to wear. This depends on contact pressure, acceleration behavior in the application, traversing speed, measurement surface, mechanical alignment of the measuring wheel, temperature, and ambient conditions. We recommend you regularly check the condition of the measuring wheel and replace as required.2) Relates to encoders with male connector connection.3) Only applies to variants with spring arm mounting.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating IP65 1)
Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Working temperature range ?30 ?C … +70 ?C
Storage temperature range ?40 ?C … +75 ?C
    1) When the mating connector is installed and the DIP switch door is sealed with the encoder housing.
Classifications
ECl@ss 5.0 27270501
ECl@ss 5.1.4 27270501
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270501
ECl@ss 8.0 27270501
ECl@ss 8.1 27270501
ECl@ss 9.0 27270501
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113