DBS60E-THEJD1024

6,754,000

Tên sản phẩm: Incremental encoders DBS60 Core

Danh mục: Encoders

Model: DBS60E-THEJD1024

ID: 1096477

Nhà sản xuất: SICK

Xuất xứ: MY

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1096477 Danh mục:

Mô tả sản phẩm

Encoders

Performance
Pulses per revolution 1,024
Measuring step 90? electric/pulses per revolution
Measuring step deviation ? 18? / pulses per revolution
Error limits Measuring step deviation x 3
Duty cycle ? 0.5 ? 5 %
Initialization time < 5 ms 1)
    1) Valid signals can be read once this time has elapsed.
Electrical data
Electrical interface 10 V … 27 V, HTL/Push pull 1)
Connection type Cable, 8-wire, universal, 0.5 m 2)
Power consumption ? 1 W (without load)
Load current ? 30 mA, per channel
Output frequency 300 kHz 3)
Reference signal, number 1
Reference signal, position 90?, electric, logically gated with A and B
Reverse polarity protection ?
Short-circuit protection of the outputs ? 4)
MTTFd: mean time to dangerous failure 500 years (EN ISO 13849-1) 5)
    1) With 6-channels unless noted.2) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.3) Up to 450 kHz on request.4) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.5) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Through hollow shaft
Shaft diameter 15 mm
Flange type / stator coupling 1-sided stator coupling, slot, screw hole circle radius 31.5?48.5 mm
Weight 0.25 kg 1)
Shaft material Stainless steel
Housing material Aluminum
Material, cable PVC
Start up torque 0.5 Ncm (+20 ?C)
Operating torque 0.4 Ncm (+20 ?C)
Permissible shaft movement, axial static/dynamic ? 0.5 mm / ? 0.2 mm 2)
Permissible shaft movement, radial static/dynamic ? 0.3 mm / ? 0.1 mm 2)
Operating speed 6,000 min?? 3)
Maximum operating speed 9,000 min?? 4)
Moment of inertia of the rotor 50 gcm?
Bearing lifetime 3.6 x 10^9 revolutions
Angular acceleration ? 500,000 rad/s?
    1) Based on an encoder with a male connector connection or a cable with a male connector connection.2) Not apllicable for stator coupling type C and K.3) Take into account self-heating of 2.6 K per 1,000 min?? when designing the operating temperature range.4) Maximum speed which does not cause mechanical damage to the encoder. Impact on the service life and signal quality is possible. Please note the maximum output frequency.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating

IP65, housing side (according to IEC 60529) 1)

IP65, shaft side (according to IEC 60529)

Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range ?20 ?C … +85 ?C 2)
Storage temperature range ?40 ?C … +100 ?C, without package
Resistance to shocks 250 g, 3 ms (according to EN 60068-2-27)
Resistance to vibration 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) With mating connector fitted.2) These values relate to all mechanical versions including recommended accessories unless otherwise noted.
Classifications
ECl@ss 5.0 27270501
ECl@ss 5.1.4 27270501
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270501
ECl@ss 8.0 27270501
ECl@ss 8.1 27270501
ECl@ss 9.0 27270501
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113