Mô tả sản phẩm
Encoders
Performance
Pulses per revolution | 500 |
Measuring step | 90? electric/pulses per revolution |
Measuring step deviation | ? 18? / pulses per revolution |
Error limits | Measuring step deviation x 3 |
Duty cycle | ? 0.5 ? 5 % |
Initialization time | < 5 ms 1) |
- 1) Valid signals can be read once this time has elapsed.
Electrical data
Electrical interface | 10 V … 27 V, HTL/Push pull 1) |
Connection type | Cable, 8-wire, universal, 0.5 m 2) |
Power consumption | ? 1 W (without load) |
Load current | ? 30 mA, per channel |
Output frequency | 300 kHz 3) |
Reference signal, number | 1 |
Reference signal, position | 90?, electric, logically gated with A and B |
Reverse polarity protection | ? |
Short-circuit protection of the outputs | ? 4) |
MTTFd: mean time to dangerous failure | 500 years (EN ISO 13849-1) 5) |
- 1) With 6-channels unless noted.2) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.3) Up to 450 kHz on request.4) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.5) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design | Through hollow shaft |
Shaft diameter | 15 mm |
Flange type / stator coupling | 2-sided stator coupling, slot, screw hole circle 63?83 mm |
Weight | 0.25 kg 1) |
Shaft material | Stainless steel |
Housing material | Aluminum |
Material, cable | PVC |
Start up torque | 0.5 Ncm (+20 ?C) |
Operating torque | 0.4 Ncm (+20 ?C) |
Permissible shaft movement, axial static/dynamic | ? 0.5 mm / ? 0.2 mm 2) |
Permissible shaft movement, radial static/dynamic | ? 0.3 mm / ? 0.1 mm 2) |
Operating speed | 6,000 min?? 3) |
Maximum operating speed | 9,000 min?? 4) |
Moment of inertia of the rotor | 50 gcm? |
Bearing lifetime | 3.6 x 10^9 revolutions |
Angular acceleration | ? 500,000 rad/s? |
- 1) Based on an encoder with a male connector connection or a cable with a male connector connection.2) Not apllicable for stator coupling type C and K.3) Take into account self-heating of 2.6 K per 1,000 min?? when designing the operating temperature range.4) Maximum speed which does not cause mechanical damage to the encoder. Impact on the service life and signal quality is possible. Please note the maximum output frequency.
Ambient data
EMC | According to EN 61000-6-2 and EN 61000-6-3 |
Enclosure rating |
IP65, housing side (according to IEC 60529) 1) IP65, shaft side (according to IEC 60529) |
Permissible relative humidity | 90 % (condensation of the optical scanning not permitted) |
Operating temperature range | ?20 ?C … +85 ?C 2) |
Storage temperature range | ?40 ?C … +100 ?C, without package |
Resistance to shocks | 250 g, 3 ms (according to EN 60068-2-27) |
Resistance to vibration | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
- 1) With mating connector fitted.2) These values relate to all mechanical versions including recommended accessories unless otherwise noted.
Classifications
ECl@ss 5.0 | 27270501 |
ECl@ss 5.1.4 | 27270501 |
ECl@ss 6.0 | 27270590 |
ECl@ss 6.2 | 27270590 |
ECl@ss 7.0 | 27270501 |
ECl@ss 8.0 | 27270501 |
ECl@ss 8.1 | 27270501 |
ECl@ss 9.0 | 27270501 |
ETIM 5.0 | EC001486 |
ETIM 6.0 | EC001486 |
UNSPSC 16.0901 | 41112113 |