Mô tả sản phẩm

Product characteristics Number of inputs and outputs Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 Application Application only for operation with AS-i masters with the profile M4 Electrical data Operating voltage [V] 26.5…31.6 DC; (“supply class 2” to cULus) Max. current consumption from AS-i [mA] 250 Reverse polarity protection yes Max. current load total [A] 0.2 Inputs / outputs Number of inputs and outputs Number of digital inputs: 2; Number of analogue inputs: 1; Number of analogue outputs: 1 Inputs Number of digital inputs 2 Number of analogue inputs 1 Input circuit of digital inputs PNP Sensor supply of the inputs AS-i Voltage supply [V] 18…30 Analogue input (current) [mA] 4…20 Max. voltage drop across load for nominal voltage [V] 10 Analogue inputs protected against short circuits yes Resolution of analogue input 12 bit Outputs Number of analogue outputs 1 Analogue current output [mA] 4…20 Max. voltage drop across load for nominal current [V] 10 Resolution of analogue output 12 bit Actuator supply analogue outputs AS-i Accuracy / deviations Measuring error [% of the final value] 0,5 Operating conditions Ambient temperature [?C] -25…70 Protection IP 67 Tests / approvals EMC

EN 50295
IEC 61000-6-2

MTTF [years] 137 AS-i classification AS-i version 3.0 Extended addressing mode possible no AS-i profile S-7.5.5 AS-i I/O configuration [hex] 7 AS-i ID code [hex] 5.5 Assignment of the parameter bits

parameter bit	function
P0	watchdog analogue output	: 1	activated	* / 0	deactivated
P1	peripheral fault indication analogue input	: 1	activated	* / 0	deactivated
P2	peripheral fault indication analogue output	: 1	activated	* / 0	deactivated
P3	not used	: 1	default value

Mechanical data Weight [g] 198 Materials PA; piercing contacts: CuSn6 nickel-plated and tin-plated Displays / operating elements Display

operation	LED, green
errors	LED, red
function	LED, yellow

Accessories Accessories (supplied)

lower part

Accessories (optional)

Protective cap: M12, E73004

Remarks Remarks

3-wire connection possible via external link.

The actuator supply on pins 1 and 3 can be used to supply the sensors / actuators.

In this case, an electrical isolation to AS-i is not given.

The analogue inputs and outputs (pins 2 and 4) are electrically separated and have no connection to AS-i.

Do not connect any of the following points to an external potential:

I-1/2, I-2, Pin 1, Pin 3

Pack quantity 1 pcs. Electrical connection ; Maximum cable length: 30 m Electrical connection – analogue Connector: M12; Maximum cable length: 30 m Electrical connection – digital Connection Connector: M12; Maximum cable length: 30 m