Mô tả sản phẩm

Electrical data Operating voltage [V] 26.5…31.6 DC Max. current consumption from AS-i [mA] 150 Max. current load total [A] 4 Integrated watchdog yes Inputs / outputs Number of inputs and outputs Number of digital inputs: 2; Number of digital outputs: 2 Inputs Number of digital inputs 2 Input circuit of digital inputs PNP Sensor supply of the inputs AS-i Voltage supply [V] 18…30; (via flat cable) Max. total current rating of inputs [mA] 100 Input current High [mA] 6…10 Input current Low [mA] 0…2 Min. switching level high signal [V] 11 Digital inputs protected against short circuits yes Outputs Number of digital outputs 2 Circuit PNP Voltage range DC [V] 15…30; (to PELV; via flat cable) Max. current load per output [mA] 2000; (utilisation category DC-13 (control of electromagnets): 40 W (IEC 60947-5-1)) Short-circuit proof yes Electrically separated yes Operating conditions Ambient temperature [?C] -10…50 Protection IP 50 Tests / approvals ATEX marking II 3D Ex tc IIIB T80?C Dc X IP50 EMC

EN 50295
IEC 61000-6-2

MTTF [years] 188 AS-i classification AS-i version 2.11 + 3.0 AS-i addressing addressing socket Extended addressing mode possible no AS-i profile S-3.0.E AS-i I/O configuration [hex] 3 AS-i ID code [hex] 0.E AS-i certificate pending yes Assignment of the data bits

data bit	D0	D1	D2	D3
input	1	2	–	–
socket	I-1	I-2	–	–
pin	2+4	2+4	–	–
Output	–	–	3	4
socket	–	–	O-3/4	O-3/4 O-4
pin	–	–	4	2 4

Mechanical data Weight [g] 241 Type of mounting AS-i flat cables directly connectable Materials PA; piercing contacts: CuSn6 nickel-plated and tin-plated Displays / operating elements Display

operation	LED, green
errors	LED, red
function	LED, yellow

Accessories Accessories (supplied)

lower part

Accessories (optional)

Protective cap: M12, E73004

Impact protection housing, E7000A

Remarks Remarks

Mechanical protection has to be implemented.

Otherwise the unit must be installed together with the impact protection housing (E7000A).

Inputs and outputs must be electrically isolated.

Do not connect any of the following points to an external potential:

I-, I+, I1, I2

The connections are electrically connected with the AS-i cable.

Pack quantity 1 pcs. Electrical connection quick mounting technology for AS-i flat cable: ; three orientations possible Electrical connection – Inputs Connector: M12 Electrical connection – Outputs Connection Connector: M12