AHS36B-S5AL004096

9,614,000

Tên sản phẩm: Absolute encoders AHS/AHM36 SSI

Danh mục: Encoders

Model: AHS36B-S5AL004096

ID: 1090294

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1090294 Danh mục:

Mô tả sản phẩm

Encoders

Performance
Number of steps per revolution 4,096
Number of revolutions 1
Error limits G 0.35? (at 20 ?C) 1)
Repeatability standard deviation ?r 0.25? (at 20 ?C) 2)
    1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.2) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface SSI
Initialization time 100 ms 1)
Position forming time 125 ?s
SSI
Code type Gray
Code sequence parameter adjustable CW/CCW configurable via cable
Clock frequency 2 MHz 2)
Set (electronic adjustment) H-active (L = 0 – 3 V, H = 4,0 – Us V)
CW/CCW (counting sequence when turning) L-active (L = 0 – 1 V, H = 2,0 – Us V)
    1) Valid positional data can be read once this time has elapsed.2) Minimum, LOW level (Clock +): 500 ns.
Electrical data
Connection type Cable, 8-wire, universal, 3 m
Supply voltage range 4.5 V DC … 32 V DC
Power consumption ? 1.5 W (without load)
Reverse polarity protection ?
MTTFd: mean time to dangerous failure 230 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Solid shaft, face mount flange
Shaft diameter 8 mm x 12 mm
Shaft length 12 mm
Shaft material Stainless steel
Flange material Aluminum
Housing material Zinc
Material, cable PUR
Start up torque 0.5 Ncm 1)
Operating torque < 0.5 Ncm 1)
Permissible Load capacity of shaft

40 N / radial

20 N / axial

Moment of inertia of the rotor 2.5 gcm?
Bearing lifetime 3.6 x 10^8 revolutions
Angular acceleration ? 500,000 rad/s?
    1) For Advanced type encoders, the shaft seal must be inspected regularly.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating

IP65, housing side (according to IEC 60529)

IP65, shaft side (according to IEC 60529)

Permissible relative humidity 90 % (Condensation not permitted)
Operating temperature range ?20 ?C … +70 ?C
Storage temperature range ?40 ?C … +100 ?C, without package
Resistance to shocks 100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113