Mô tả sản phẩm
Encoders
Performance
Number of steps per revolution | 4,096 (max.) |
Number of revolutions | 4,096 (max.) |
Resolution | 12 bit x 12 bit |
Error limits G | 0.35? (at 20 ?C) 1) |
Repeatability standard deviation ?r | 0.25? (at 20 ?C) 2) |
- 1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.2) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface | IO-Link |
Communication Interface detail | V1.1, COM3 (230,4 kBaud) |
Process data | Position, speed |
Parameterising data |
Number of steps per revolution Number of revolutions PRESET Counting direction Sampling rate for speed calculation Unit for output of the speed value |
Status information | Via status LED |
Initialization time | 2 s 1) |
Cycle time | ? 3.2 ms |
- 1) Valid positional data can be read once this time has elapsed.
Electrical data
Connection type | Cable, 4-wire, universal, 3 m |
Supply voltage range | 18 V … 30 V |
Power consumption | ? 1.5 W |
Reverse polarity protection | ? |
MTTFd: mean time to dangerous failure | 240 years (EN ISO 13849-1) 1) |
- 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design | Solid shaft, face mount flange |
Shaft diameter | 6 mm x 12 mm |
Shaft length | 12 mm |
Weight | 0.12 kg 1) |
Shaft material | Stainless steel |
Flange material | Aluminum |
Housing material | Zinc |
Start up torque | < 0.5 Ncm |
Operating torque | < 0.5 Ncm |
Permissible Load capacity of shaft |
40 N / radial 20 N / axial |
Moment of inertia of the rotor | 2.5 gcm? |
Bearing lifetime | 3.6 x 10^8 revolutions |
Angular acceleration | ? 500,000 rad/s? |
Operating speed | ? 6,000 min?? |
- 1) Relates to devices with male connector connection.
Ambient data
EMC | According to EN 61000-6-2 and EN 61000-6-3 |
Enclosure rating | IP65 (IEC 60529) |
Permissible relative humidity | 90 % (Condensation not permitted) |
Operating temperature range | ?20 ?C … +70 ?C |
Storage temperature range | ?40 ?C … +100 ?C |
Resistance to shocks | 100 g, 6 ms (according to EN 60068-2-27) |
Resistance to vibration | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
Classifications
ECl@ss 5.0 | 27270502 |
ECl@ss 5.1.4 | 27270502 |
ECl@ss 6.0 | 27270590 |
ECl@ss 6.2 | 27270590 |
ECl@ss 7.0 | 27270502 |
ECl@ss 8.0 | 27270502 |
ECl@ss 8.1 | 27270502 |
ECl@ss 9.0 | 27270502 |
ETIM 5.0 | EC001486 |
ETIM 6.0 | EC001486 |
UNSPSC 16.0901 | 41112113 |