AFM60A-BHPK262144

21,919,000

Tên sản phẩm: Absolute encoders AFS/AFM60 SSI

Danh mục: Product portfolio

Model: AFM60A-BHPK262144

ID: 1038904

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1038904 Danh mục:

Mô tả sản phẩm

Product portfolio

Performance
Number of steps per revolution 262,144 (max.) 1)
Number of revolutions 4,096
Resolution 18 bit x 12 bit
Error limits G 0.03? 2)
Repeatability standard deviation ?r 0.002? 3)
    1) See maximum revolution range.2) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.3) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface SSI
Initialization time 50 ms 1)
Position forming time < 1 ?s
SSI
Code type Gray
Code sequence parameter adjustable CW/CCW parameter adjustable
Clock frequency ? 2 MHz 2)
Set (electronic adjustment) H-active (L = 0 – 3 V, H = 4,0 – Us V)
CW/CCW (counting sequence when turning) L-active (L = 0 – 1,5 V, H = 2,0 – Us V)
Incremental
Load current ? 30 mA
    1) Valid positional data can be read once this time has elapsed.2) Minimum, LOW level (Clock +): 500 ns.
Electrical data
Connection type Cable, 8-wire, universal, 1.5 m 1)
Supply voltage range 4.5 V DC … 32 V DC
Power consumption ? 0.7 W (without load)
Reverse polarity protection ?
MTTFd: mean time to dangerous failure 250 years (EN ISO 13849-1) 2)
    1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Blind hollow shaft
Shaft diameter 15 mm
Weight 0.2 kg 1)
Shaft material Stainless steel
Flange material Aluminum
Housing material Aluminum die cast
Start up torque < 0.8 Ncm 2)
Operating torque < 0.6 Ncm 2)
Permissible movement static

? 0.5 mm (axial)

? 0.3 mm (radial)

Permissible movement dynamic

? 0.1 mm (axial)

? 0.05 mm (radial)

Moment of inertia of the rotor 40 gcm?
Bearing lifetime 3.0 x 10^9 revolutions
Angular acceleration + 500,000 rad/s?
Operating speed ? 6,000 min?? 3)
    1) Relates to devices with male connector connection.2) At 20 ?C.3) Allow for self-heating of approx. 3.3 K/1,000 rpm when designing the operating temperature range.
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating

IP65, shaft side (according to IEC 60529)

IP67, housing side (according to IEC 60529) 2)

Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range ?40 ?C … +100 ?C 3)
Storage temperature range ?40 ?C … +100 ?C, without package
Resistance to shocks 60 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) EMC according to the standards quoted is achieved if shielded cables are used.2) For devices with connector outlet: With mating connector mounted.3) Stationary position of the cable.
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113