A3M60A-BGPB014X17

24,314,000

Tên sản phẩm: Absolute encoders A3M60 PROFIBUS

Danh mục: Encoders

Model: A3M60A-BGPB014X17

ID: 1053336

Nhà sản xuất: SICK

Xuất xứ: DE

Hàng mới 100%, bảo hành 12 tháng theo quy định nhà sản xuất

Cung cấp chứng nhận xuất xứ (CO), chứng nhận chất lượng (CQ) theo yêu cầu khách hàng

Mã: 1053336 Danh mục:

Mô tả sản phẩm

Encoders

Performance
Number of steps per revolution 16,384 (max.)
Number of revolutions 131,072 (max.)
Resolution 14 bit x 17 bit x 16,384 (131,072)
Error limits G 0.35? (at room temperature) 1)
Repeatability standard deviation ?r 0.15? (at room temperature) 2)
    1) In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.2) In accordance with DIN ISO 55350-13, 68.3% of the measured values are inside the specified area.
Interfaces
Communication interface PROFIBUS DP
Communication Interface detail DPV0
Data protocol PROFIBUS DP V0, PROFIBUS DP V1 + V2
Data transmission rate (baud rate) ? 12 MBaud
Parameterising data Number of steps per revolution, number of revolutions,PRESET, counting direction, samplingrate for calculating position, unit for output ofthe speed value, round axis functionality
Available diagnostics data Maximum speed, power-on counter, operating hours counter (motion), counter for number of cw movements/number of ccw movements, minimum and maximum supply voltage
Bus termination DIP switch
Initialization time Approx. 1 s
Electrical data
Connection type Male connector, 3 x M12, 5-pin, axial
Supply voltage range 10 V … 32 V
Reverse polarity protection ?
MTTFd: mean time to dangerous failure 60 years (EN ISO 13849-1) 1)
    1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40?C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Blind hollow shaft
Shaft diameter 14 mm
Weight 0.28 kg
Shaft material Stainless steel
Flange material Aluminum
Housing material Aluminum
Start up torque 2 Ncm
Operating torque 1.6 Ncm
Permissible shaft movement, axial static/dynamic ? 0.5 mm, ? 0.2 mm
Permissible shaft movement, radial static/dynamic ? 0.3 mm, ? 0.1 mm
Bearing lifetime 3.0 x 10^9 revolutions
Angular acceleration ? 500,000 rad/s?
Operating speed ? 9,000 min?? self warming 35 K at maximum operating speed
Ambient data
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating

IP67, housing (according to IEC 60529) 1)

IP67, Shaft (according to IEC 60529) 1)

Permissible relative humidity 95 % (Condensation not permitted)
Operating temperature range ?30 ?C … +80 ?C
Storage temperature range ?40 ?C … +100 ?C
Resistance to shocks 100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
    1) With mating connector inserted.
Classifications
ECl@ss 5.0 27270502
ECl@ss 5.1.4 27270502
ECl@ss 6.0 27270590
ECl@ss 6.2 27270590
ECl@ss 7.0 27270502
ECl@ss 8.0 27270502
ECl@ss 8.1 27270502
ECl@ss 9.0 27270502
ETIM 5.0 EC001486
ETIM 6.0 EC001486
UNSPSC 16.0901 41112113