Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > RTK


Sensors Resistance thermometer
Code: Series WT 1000
Resistor elements in accordance with DIN 43760 IEC 571
Measuring resistor PT 100
Fastest response time
Easy to install
Can be replaced without calibration

Sensors Pressure gauges
Code: Series DR 1226
Piezoresistive
Measuring range up to 60 barg
Output 4...20 mA
Power supply 24 V DC
with pressure gauge
Two-wire system

Sensors Level transducers
Code: Series NI 1331 / 1332
Linear measuring range 150 - 4000 mm
Wear-resistant, inductive tracing (differential transformator)
powered loop 4 – 20 mA
measuring range digital calibratable
trend display per 10% steps
No connection between displacer and electronic

Sensors Power supply unit
Code: Series NG 1534
Wide input range 85-264 VAC
Output short-circuit-proof / Over voltage protection
Fulfill norms: IEC/EN60950, EN50178, UL/cUL60950, UL508C
clamp rail assembly
DIN Clamp

Electric components Process controller
Code: RE 3304/RE 3052/3053/RE 3070
Electronic 3-term step-controllers with PI-control
Drive for electric actuators
Set point selection by manual controller or programme tuner
Function points for limit monitor and measuring transducer
Disturbance variables and auxiliary two element control
Manual and automatic operation

Electric components Switch gears
Code: SG 2411/SG 2431
Electronic switchgear for 2-point control including 2 limit contacts
3 voltage-free change over contacts
Control contact with adjustableon/off switch points
2 random adjustable limit contactsbetween 4 and 20 mA
LED-indication for the input signal

Electric and pneumatic control valves (heat control)
Code: MV 5200/MV 5300/MV 5400

Motorized control valves for throttling, mixing and diverting of liquids and gases
Two-way and three-way design
Optimum control by adjusted cone assemblies
Various cone designs
Body material made of GG 25, GGG 40.3, GS-C 25, 1.4408
ANSI - Control valves in 2-way design, Material A216 WCB 1“,1½ “, 2 “, 2 ½ “, 3“, 4“, 6“ , Class 150 and class 300 for Electric and pneumatic actuators


Electric and pneumatic control valves (refrigeration control)
Code: MV 5200K/MV 5300K/MV 5400K
Motorized control valves for throttling, mixing and diverting of liquids and gases
Two-way and three-way design
Optimum control by adjusted cone assemblies
Various cone designs
Body material made of GG 25, GGG 40.3, GS-C 25, 1.4408

Motorized control valves for mixing and distribution of thermal oil and liquids and gases
Code: Series MV 5270 / PV 6270, MV 5200/PV 6200, MV 5300/PV 6300, MV 5400/PV 6400
Nominal diameter DN 20...300
Three-way design
Three-way design with short B-flange
Spindle packing with chevron rings or long life torsion safe chambered bellows seal
Easy to change actuator orientation for operation and cabling access
Optimum control by adjusted cone assemblies
Various cone designs
ANSI - Control valves in 3-way design

Next»
Select language

Liên Hệ Trực Tuyến

  Tel: 08-3511.1293

  Email: info@thietbisaoviet.com



SẢN PHẨM CHÍNH
encoder
bom-axit
sensor
bom-nuoc
bom-inox
valve-ari
bom-banh-rang
bom-truc-vit
cylinder

Cảm Biến - Sensor

Lượt truy cập



SAO VIET INDUSTRIAL EQUIPMENT CO., LTD.
Office: 29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.1293      Fax: 08-3511.6606
Email: info@thietbisaoviet.com
Copyright © 2010 www.thietbisaoviet.com
Phát triển bởi N N H